1996 Wilbur 34 Weekender

Fiberglass Specifications: The hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8" to 3/4" at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass. Hull was fared and AWLGRIP flag-blue paint applied in 2019.

Aft of the V-berth is an L-shaped galley with ample counter top space. The 3-burner propane cook-top stove is as new never having been used. The micro-wave oven is recessed into the counter cabinet. A large stainless steel sink with hot and cold pressurized water handles large pots and pans easily. The large custom top loading AC / DC refrigerator combines with a freezer to provide fresh food. The storage of crockery and food stuffs is accomplished with an abundance of custom cabinets and drawers.

To create an open feel, the cabin area consists of one area containing a V-berth, hanging locker, galley and enclosed head with separate stall shower, the headroom down below is approximately 6'3". The cabin is finished in white Formica and gel coat with varnished teak bulkheads, drawers, doors and moldings. The cabin is ventilated with two opening hatches and 6 opening ports. The forward V-berth has a filler piece, substantial storage underneath and ash ceilings cover the hull sides.  The vessel is equipped with an Espar heater to help extend the season in the cooler climates. Fresh water Vacuflush head.

3208 CAT TA 375 HP 2019 / 519 hours since Billings Diesel Bench-rebuild of the exterior completed. 

21 Knots at 2800rpm 16kts at 2375rpm

2021 Prop scanned 24" x 23" 5-Blade 1-3/4" bore stainless shaft

CAT Dealer recent engine maintenance 

• Garmin 8612 chartplotter with BlueCharts
• Garmin GMR 24x HD radome
• Garmin GHC 20 Autopilot with Rudder indicator
• Garmin B60 thru hull xducer
• Garmin WAAS antenna
• Garmin AIS 800 transceiver
• Garmin heading sensor
• Icom M506 VHF
• Xantrex Freedom SW 3012 Inverter
• FLIR M232 tilt/pan/zoom infrared camera
• Fusion MS UD-755 stereo head unit
• Fusion SG-DA51600 5 channel 1600W amplifier
• Fusion XS-F65CWB 6/5” round speakers (pilot house)
• Poly-planar 200W MA-9060 speakers in cockpit

The vessel comes with custom covers and custom teak table.  Bow rail has a stainless pennant post while the teak transom ensign lets all know the captain is aboard. The soft-top has a quick release system for those days when no top is needed.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.